QuadSpan™ WALL-LIGHTS

Removeable Skin Technology
Extend Your Building Envelope Performance and Longevity!

QuadSpan™ STANDARD SKYLIGHT PANEL

Quadwall System
  • QuadSpan™ is an assembly of TWO INDEPENDENT translucent INSULATED SINGLE panels, forming one integrated high-performance daylighting system.
  • The exterior and interior insulated single panels are connected with concealed connectors.
  • The interior insulated panel is ALWAYS shielded from outside weather conditions, UV radiation, impact and other hazards.
  • Each translucent single panel, both exterior and interior, is available in a wide range of colors, finishes, thermal performance and thicknesses.
  • QuadSpan™ panels are available in thicknesses of 2.75″ and 4″ with uninterrupted lengths of up to 44′ long.
  • Insulation value for the standard QuadSpan™ panel is 0.23 per NFRC 100, as mandated by building codes (tested, certified and labeled per NFRC).

QuadSpan™ LONG-SPAN WALL-LIGHT PANEL

Quadwall long span

QuadSpan™ self-span capability is increased with the addition of concealed aluminum H connectors. A wide range of aluminum H connectors are available to maximize spanning performance. The double tooth grip-lock design of the H connector and glazing panels provides a secure and durable 2 panel assembly. The system includes a built-in internal gutter under the exterior panel that ensures drainage in isolation from the interior panel.

  • The QuadSpan™ Long-Span can be designed to span from 6′ to 14′ long, based on the required design load.
  • QuadSpan™ Long-Span optimizes the design of the supporting structure, resulting in cost savings over single insulated panels.
  • QuadSpan™ can be configured for compliance with the DoD Antiterrorism Standard for Buildings, UFC4-010-01, 2/9/2012

Wall Systems
 

QuadSpan™
Data Sheet

Quadwall Product Data Sheet

Finish Options

Finish Color Options

Panel Colors

Standard – clear matte, white matte, ice white matte, blue matte, green matte
Consult for other color options, including bronze matte, gray matte, white pearl low-e and other exotic colors.
NOTE: all colors available with non-matte finish upon request

Uniquad-colors

Case Study
Ferris Study

Case Study
Richmond Oval

Technical
Data

Free phone consultation to discuss options. 1-866-759-7732

Also Available Through the Direct2Fab Program

Direct2Fab is a fast delivery program for custom sized wall-lights.

Each D2F project moves directly from order entry to the fabrication floor. CPI’s proprietary automated D2F engineering system essentially replicates the same methodology and heuristics employed by engineers using computerized technology. D2F automation eliminates weeks of engineering and submittal time, allowing CPI to provide custom sized wall-lights at the same cost as standard sizes.

  • Any length with a maximum height up to 12′.
  • Delivery times for Custom Daylighting Systems as short as 3-8 weeks.
  • Available panelized with vertical mullions or flush look with no vertical mullions.
  • D2F Wall-Lights are designed for 40 psf wind load
  • Standard manufacturer submittal package.

The FMS building earned LEED® Silver Certification, and the JFRC has earned LEED® Gold Certification. Some sustainable features of this project include a horizontal geothermal system, extensive daylighting (including a translucent wall lights installation), construction waste recycling, water-efficient landscaping, lighting controls and enhanced commissioning. Part of the new building is lit by natural daylighting in the form of a wall lights installation instead of skylights.

Direct to Fab wall-lights

JF READINESS CTR – Cheyenne, WY — Skylight Specialists Inc.